F860
4
Rev. 11/05
Ph: 800-421-6511
www.picomacom.com
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Product Inspection
Inspect the equipment for shipping damage. Should any damage be discovered, immediately file a claim with the carrier.
Important Safety Instructions
To ensure proper installation and operation, take a moment to read this guide before proceeding with the installation. If you have any questions
or comments about the
F860
Fixed Modulator, please contact your dealer or have him contact the PICO MACOM Service Center at the phone
number on the bottom of the page.
1. Read Instructions:
All safety and operating instructions should
be read before the appliance is operated.
2. Retain Instructions:
The safety and operating instructions
should be retained for future reference.
3. Heed Warnings:
All warnings on the appliance should be
adhered to.
4. Follow Instructions:
All operating and user instructions should
be followed.
5. Cleaning:
Unplug this appliance from wall outlet. Use a damp cloth
for cleaning. Do not use liquid cleaners or aerosol cleansers.
6. Do Not Use Attachments
not recommended by the manufacturer;
they may cause hazards.
7. Accessories:
Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to persons and serious damage to the appliance.
8. Damage Requiring Service:
Disconnect this product from the
system and refer servicing to qualified service personnel under
the following conditions:
a.
If liquid has been spilled, or objects have fallen into the product.
b.
If the product has been exposed to rain or water.
c.
If the product does not operate normally by following the
operating instruction. Adjust only those controls that are
covered by the operating instructions. An improper adjustment
may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal
operation.
d.
If the product has been dropped or the cabinet has been damaged.
e.
When the product exhibits a distinct change in performance —
this indicates a need for service.
9. Replacement Parts:
When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original parts.
10. Safety Check:
Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating conditions.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO
NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. TO PREVENT ELECTRIC SHOCK DO NOT USE
THE (POLARIZED) PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
Safeguards
NOTE TO THE CATV SYSTEM INSTALLER
THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER’S
ATTENTION TO ARTICLE 820-22 OF THE NEC THAT PROVIDES GUIDELINES
FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE
CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF
THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.
F860 Manual.qxd 11/21/05 10:17 AM Page 4
