MOR
Series
7
Rev. 06/03
Ph: 800-421-6511
www.picomacom.com
Installation Procedure
Installation
It is recommended that assistance be available to safely install equipment in equipment racks.
1
.
Begin assembly of the rack by attaching the rail supports (2 pcs.) to the base.
2
.
Attach the side rails (2 pcs.) to the rail supports.
3
.
Attach the top brace (1 pc.) to the top ends of the side rails.
4
.
Check all of the nuts and bolts (14) for tightness before mounting components on the rack.
5
.
Always place
MOR-** on a stable level surface.
6
. For added stability attach the base plate of the
MOR-** to the structure of the flooring (check local construction codes for compliance) with proper
mounting hardware (not provided).
