MPCM45
6
Rev. 04/03
Ph:800-421-6511
www.picomacom.com
Operation and Controls
Front, Rear and Side Panels
1. Audio Level Control:
Use this control to adjust the audio modulation level (volume).
2. Video Level Control:
Use this control to adjust the video modulation level (picture quality).
3. Audio /Video Ratio Control:
Used to set the level of the audio carrier in relation to the video carrier.
4. RF Output Level Control:
Used to set output level.
5. Power On LED:
Indicates power is on when lit.
6. Video Input:
Accepts video output from satellite receiver, VCR and CCTV camera.
7. Audio Input:
Accepts audio output from satellite receiver and VCR.
8. RF Output:
Connect this port to channel combining system
9. DC Power Input:
The three-wire power cable from the power supply connects to this jack.
10. Preemphasis on/off:
Allows preemphasis to be disabled when used with BTSC generator.
Panels
AUDIO
VIDEO
PWR
RF
A/V
RATIO
CH.
4
10
1
9
2
3
4
6
7
8
5
MPCM45
PICO MACOM
