PT-104 Data Logger User's Guide
11
Copyright © 2013 Pico Technology Ltd. All rights reserved.
usbpt104.en r2
5.
USB connection:
Select the device with the correct type and serial number, and
click
OK
.
Ethernet connection:
Any
PT-104 Data Logger
devices visible to your
computer on your local network will appear in the list. Select the device with the
correct type and IP address, and click
OK
. If your device does not appear in the
list, type its IP address and port number in the boxes below the list.
When you click
OK
, the
PT-104 Data Logger channels
window will appear:
6. In the
PT-104 Data Logger channels
window, double-click on
Ch1 unused
.
The
Edit PT-104 Data Logger Channel
dialog box appears:
7. Type in a name for the channel, if required.
8. Select the data type required i.e temperature, resistance or voltage.
9. Select circuit - for PT100, PT1000 and Resistance data types only.
