Connect your PicoStill to WiFi
1. Power on your Pico or Z, and connect it to your WiFi network (see Pico manual for details).
Your Pico/Z will update itself with the latest firmware. Important: make sure that you are using
your equipment in an area with a strong WiFi signal.
2. Power on your PicoStill and wait for the green and yellow LEDs to illuminate and stay on.
3. From the main menu on the Pico or Z, select ‘Utilities’ and then PicoStill.
4. Follow the on-screen prompts to set up manual distillation.
Did this correct your issue?
Yes! -> Problem solved!
The Green LED is now flashing on my PicoStill ->
Go To ‘PicoStill Ready’
The Yellow LED is now flashing on my PicoStill ->
Go To ‘Updating Firmware’
Different LED's are now flashing on my PicoStill ->
Go To ‘Which LED's are illuminated?’
I need further assistance ->
Go To ‘PicoBrew Support’
I am using my PicoStill with a Zymatic ->
Go To ‘I am operating my PicoStill with a Zymatic’
Which LED's are illuminated?
All three LED's blinking ->
Go To ‘All three LED's blinking - PicoStill Booting’
Red Solid ->
Go To ‘PicoBrew Support’
Red Blinking ->
Go To ‘PicoBrew Support’
Red and Yellow Blinking Together ->
Go To ‘PicoBrew Support’
Red and Yellow Alternating ->
Go To ‘WiFi SSID not found’
1 Red and 2 Yellow Blinks ->
Go To ‘Invalid WiFi Credentials’
1 Red and 3 Yellow Blinks ->
Go To ‘WiFi Connection Timeout’
1 Red and 4 Yellow Blinks ->
Go To ‘WiFi - No Internet’
