PicoPhone series – loudspeaking phones
Page
14
.
The volume for the door phone conversations on the Picolo and the PicoCombi are regulated
with the same procedure as for telephone conversations.
Telephone volume setting and door phone volume setting are stored independent of each
other.
4.10 Auditory feedback
It is possible to record a predefined set of words into the PicoPhone series which may be used
as an auditive feedback in ordinary use, and while programming the device. If the user not has
any need for this auditive feedback it can be disabled in advanced programming mode.
Auditive feedback in advanced programming mode can not be disabled.
If auditive feedback is enabled, it will be heard in the following situations:
When someone tries to transmit an unprogrammed telephone book number it will say
“empty”.
When someone transmits a telephone book number it will say the position of the number
in the telephone book.
When the keys for 0-9, *, # are pressed and the telephone line not is activated (“C”), every
digit will be said. If the keys are pressed faster than the digits are presented, the feedback
will not be stopped. It will be stopped when the keys “E” or “C” are pressed.
The following words can be recorded:
“0-9”, “*”, “#”, “Empty”, “Saved”, “Error” and “Pause”.
4.11 Voice message
Three different voice messages with duration up to 5 seconds may be recorded. 1, 2 or all 3
may be assigned to 1-5 different situations in a free order. When the situation becomes real,
the message will be spoken automatically. The 5 situations are:
1.
Answer the door phone.
Initiated by the user or automatic answering function.
2.
Unlock door and end conversation with door phone.
Initiated by the user.
3.
End conversation with door phone without open/unlock door (refuse visitor).
Initiated by the user or timeout.
4.
Answering incoming telephone conversation.
Initiated by the user or automatic answering function.
5.
End telephone conversation.
Initiated by the user or timeout when using automatic answering function.
Example:
You may for instance record the following: “
Hi, this is John. I am not able to talk, but I can
hear what you say
” as message number 1 (this is done in advanced programming mode). So,
let message number 1 be “copied” to situation 1 and situation 4 (also done in advanced
programming mode). When John answer the door phone (=situation number 1 in the list
above) or if he is answering the telephone (=situation number 4 in the list above) message
number 1 will be automatically played back in the beginning of the conversation.
4.12 Automatic answering function
The automatic answering function can be turned on and off with an IR-remote controller or
with the “automatic answering function key” on the device. The function will be active both
