PicoPhone series – loudspeaking phones
Page 4.
1 Introduction
This documentation is made for Picomeds PicoPhone series. This is a series of loudspeaking
IR-controlled analogue telephone and door phone and they are a part of Picomeds
environmental control system.
This user manual covers all versions of the PiocPhone series. Some of the functions described
in this document are not available in all versions.
1.1 PicoPhone products in general
Picomeds loudspeaking phones can be delivered in different variants. These are:
Picolo – door phone with one or two outdoor devices.
PicoPhone – analogue telephone.
PicoCombi – dual purpose door phone and analogue telephone.
The device does not have any telephone handset, only loudspeaking function. An external
loudspeaker and/or microphone can be connected, i.e. a headset can for instance be connected.
It is controlled by a remote controller which transmits infrared (IR) signals. One can use
Picomeds IR-remote controllers, or it is possible to let the device be controlled by a foreign
IR-remote controller. There is a built-in IR-receiver, and in addition it is possible to connect
two external IR-sensors. Switches can be connected to the loudspeaking products to control
the main functions. External speaker and microphone can also be connected. The PicoPhone
products are designed for indoor use.
It is possible to record speech into it and the recorded speech is divided into two types:
Auditive feedback which is intended to be used as guidance for the user about which
functions are chosen. For example as an information about which digits pressed in a
telephone number.
Voice messages which can be played back to the one you are speaking to in the telephone
or in the outdoor phone.
A built-in automatic answering function can be activated if required.
There are a number of programmable settings to make. I.e. the number of ringing signals
before the automatic answering function triggers, disable ringing sound, which IR-format to
be the active one, trainable IR and so on.
2 Getting started
The following parts are included when the product is delivered:
Device.
Power supply for connection to AC power outlet.
PicoPhone and PicoCombi: telephone wire.
This documentation.
In addition a remote controller which transmits infrared signals (IR) should be used to control
the device to get full access to all functions. Picolo and PicoCombi can be connected to 1 or 2
door phone outdoor units which are not delivered with the devices.
