background image

Batteries can have harmful effects. If 
swallowed, seek medical attention 
immediately. 

Always keep the detector, batteries and 
accessories out of the reach of children.

Leaking batteries can damage the detector. 
Therefore, if the detector is not used for a 
long time (over 30 days), remove all 
batteries.

Batteries do not belong in household waste 
but must be disposed of properly.

Always use fresh batteries of the correct 
size and specification and never mix old 
and new batteries.

Avoid detecting in zones where battles are 
known to have taken place. Exercise 
extreme caution with any suspect object 
resembling munitions, grenades, mines, 

bombs, etc… Notify the relevant authorities 

of any such object you find.

For your safety and to avoid damage, read the instruction manual and the safety information completely and keep them for future reference.

Safety information

If the detector is damaged, stop using it.

Never repair the detector and accessories 
yourself.

If you have problems or damage, please first 
contact your dealer.

When the MTC PROFESSIONAL metal detector 
is put into operation, it may affect the 
function of pacemakers or other sensitive 
electronic devices. In case of doubt, please 
contact the manufacturer or seller before use.

The manufacturer as well as the seller are not 
liable for damage to health or material caused 
or generated by the improper and / or illegal 
use of the MTC PROFESSIONAL.

Always adhere to the local, national and 
international laws.

Always respect the rights and property of 
others.

Never destroy historical or archaeological 
treasures. If you are not sure about the origin 
of a detected object, please contact a 
museum or an archaeological association in 
the region.

Leave the plot of land as well as the 
vegetation in the condition in which they 
were when you arrived. Do not damage 
fences, walls or buildings. Fill in the holes you 
dig.

Use the MTC PROFESSIONAL only on safe 
terrain.

Never leave waste, but dispose of it properly.

There is a potential danger to life when 
touching live cables or transformers.

22

Risk of injury or death

Information on damage to property and the environment

General information

Summary of Contents for MTC PROFESSIONAL
























Reviews: