background image

 

 

Picote Solutions Oy Ltd

 

5

 

www.picoteinstitute.com

 

TRANSPORT 

 

The Midi Roller should be transported laid down or attached to the Picote Wet

-

Out Station and secured with 

ratchet straps to prevent any sudden movements or accidents caused by hard braking or accident. Always 
use a suitable cover to protect the unit from the elements.

 

 

STORAGE

 

The Midi Roller should be stored indoors to protect it from rain and sunlight and somewhere with a constant 
ambient 

 

temperature. The best way to store the machine is to use the box that the unit was shipped in.

 

If the machine has been stored in an environment colder than +10 

o

C or +50 

o

F, the machine should be 

stood at room temperature for 24 hours before use

.

 

If the machine has been stored for long periods of time (over 2

-

3 months), it should be checked and tested 

according to the maintenance programme before use. 

 

Charge the machine battery to around 80% capacity before storing for long periods. 

 

NEVER leave the unit unattended while it is charging

.

 

DISPOSAL

 

Midi Roller motor, control box, battery charger and electric wires,  can be disposed of in Europe at Waste 
Electrical and Electronic Equipment (WEEE) collection points. 

 

The roller, bottom plane and name plate can be recycled in metal waste collection points. The frame can be 
disposed of as plastic waste. 

 

Always follow local waste handling rules and regulations.

 

Recycle Li

-

ion batteries according to local regulations. 

 

Do not dispose of in fire! Do not puncture!

 

ENVIRONMENTAL

 

Operational Ambient Temperature Range:

 

 

-

20 

o

C to +60 

o

C (

-

o

F to +140 

o

F) frost and condensation free

 

Charge Ambient Temperature Range:

 

 

 

o

C to +45 

o

C (32 

o

F to +113 

o

F) frost and condensation free

 

Storage Ambient Temperature Range:

 

 

 

-

20 

o

C to +45 

o

C (

-

o

F to +113 

o

F) frost and condensation free

 

Maximum Altitude: 

  

 

 

 

 

2000m or 6500 ft. Derate above 1000m or 3280ft: 1% / 100m or 

 

 

 

 

 

 

 

 

328ft

 

Maximum Humidity:

 

 

 

 

 

95% non

-

condensing

 

 

 

This section contains important safety information. Failure to comply could result in serious injury or death

 

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

 

ENVIRONMENT, TRANSPORT, STORAGE & DISPOSAL

 

Summary of Contents for 2390000010



















Reviews: