4
Always read all safety warnings and instructions.
Failure to follow warnings and instructions may result in expo-
sure of chemicals or serious hand injury.
GENERAL MACHINE SAFETY WARNING
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
SAFETY REQUIREMENTS
1.
Always wear eye protection as well as chemical resistant gloves.
Other personal
protective equipment, such as dust or fresh
-
air mask and overalls should be worn when
necessary. Dust produced when working can be dangerous to your health, inflammable
or explosive. Always wear appropriate protective equipment.
2.
Always read carefully the safety data sheet of the resin used to impregnate liner before first use. Always follow
the resin and liner supplier instructions for use.
3.
Before each use
inspect the equipment carefully for any damage.
Change damaged parts immediately.
4.
When impregnating the lining, it is very important that it is supported on a stable, even surface at all times. The
liner is easiest to impregnate evenly with Liner Glider when the process is done on sufficient size table.
5.
If the working environment is extremely hot, use ice or other coolants to increase the working time of the mixed
resin. Check the instructions from the resin manufacturer for detailed information.
6.
Ensure that the resin mixing and impregnation areas are properly ventilated before using the equipment. The
operator must wear air respirator system if the working space does not have sufficient enough ventilation to
avoid inhalation of potentially harmful vapors.
7.
Only use this equipment with the accessories and spare parts offered by the Picote Solutions. Accessories and
spare parts should only be used in the manner intended and as described by the Picote Solutions.
This section contains important safety information. Failure to comply could result in serious injury.
This section contains important safety information. Failure to comply could result in serious injury.