17
6
Picote Solutions Oy Ltd www.picotesolutions.com
TRANSPORT
Maxi Miller Power+ should be transported in car or other vehicle laid down and secured with ratchet straps to prevent
any sudden movements or accidents caused by hard braking or accident.
Never transport machine with tool attached to the shaft.
If using pick
-
up or trailor to transport Picote milling machines, cover the unit to protect it from raining water and dust.
STORAGE
It is recemmended that milling machines are stored indoors protected from rain and sunlight and in constant ambient
temperature. Best way to store the machines is in the same box that the machine has been shipped.
If Maxi Miller Power+ will be stored in colder environment than +10
o
C (50
o
F ), the milling machine should be stood at
room temperature for 24hours before use.
If Maxi Miller Power+ has been stored for long periods of time (over 2
-
3 months), it should be checked and tested accor-
ding to maintence program before use.
This section contains important safety information. Failure to comply could result in serious injury or death.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
DISPOSAL
Maxi Miller Power+ motor, control box, electric wires and axle package including slip ring can be disposed in Europe at
Waste Electrical and Electronic Equipment (WEEE) collection points. Miller frame, reel and shaft can be recycled in me-
tal waste collection points. Outer casing of the shaft can be disposed of as plastic waste.
Always follow the local waste handling rules and regulation.
ENVIRONMENTAL
Operational Ambient Temperature Range:
-
10...50
o
C (14...122
o
F) frost and condensation free
Storage Ambient Temperature Range:
-
20...60
o
C (
-
4...140
o
F) frost and condensation free
Maximum Altitude:
2000m (6500 ft). Derate above 1000m: 1% / 100m
Maximum Humidity:
95% non
-
condensing
