12
6. Battery & LED status
[ Safety Notice for Using the Battery ]
Standby: 15 hours
Phone call: 5 hours 30
minutes
Approximately 2 hours
Charge on a connection to
the Adapter
Maximum hours of use
when charged
Approximately 4 hours
Charge on a connection
from the USB
[ Hours for Charging & Use ]
[ Battery Charge LED]
[ Radio Function LED ]
Green
Orange
After Charging
While Charging
II. Understanding
Your Phone
Blinking
Slowly
-
-
-
Standby
Blinking
Quickly
-
-
Searching
Amber
Blue
Blue
Blue
In Use
Phone
DMB
Bluetooth
WLAN
Division
•
Batteries are expendable products and with regular use over time
they will lose there ability to fully charge.
• The battery may overheat from its application environment.
• If the fully charged battery lasts only half the time from its originally
purchased state, you should purchase a new battery. (Batteries have
a 6 month period guarantee.)
• The time that a battery may last may differ according to the lighting
of the monitor, temperature, length of its use, etc.
• Battery exhaustion may be considerably faster in areas where
Bluetooth, wireless Internet, or phones cannot be used.
(Bluetooth, wireless Internet, and phone functions should be turned
off when these functions are not in use. This will help save the
battery.)
•Leaving the battery on the re-charger after it has been recharged,
will not damage the battery.
• If the cables to the main body are not properly connected, the lights
on the main body may not come on during the recharging process.
Always check and make sure that all cables are connected properly.
• Do not remove the battery while it is in use. This may result in
damage of data and the PDA may be initialized.
• If the battery is not sufficiently charged, the PDA may turn off while
in use. Always check and make sure that the battery your using has
been sufficiently charged.
If the battery is running low on power, a warning notice may appear on the monitor with a warning sound.
Charging and usage hours may differ from that of the manual, according to the user’s application environment.
New batteries are not charged, therefore you must fully charge the battery before use.
