Pierenkemper Operating Instructions - MiniFG
24
Switching the Device Off
The device will be switched off by means of the key.
If the battery voltage has fallen below a critical level or no key has been pressed for one
minute outside stimulation, the device will switch off automatically. It will respond with a
signal tone.
Standard Programs
1. Type of Operation: C
Frequency:
33333 Hz
Impulse Shape:
pos. Sinus
Running Time:
60 min.
2. Type of Operation: C
Frequency:
33333 Hz
Impulse Shape:
pos. – neg. Sinus
Running Time:
60 min.
3. Type of Operation: C
Frequency:
33333 Hz
Impulse Shape:
pos. Rectangle
Running Time:
60min
4. Type of Operation: C
Frequency:
33333 Hz
Impulse Shape:
pos. – neg. Rectangle
Running Time:
60 min.
5. Type of Operation: P
Frequency:
33333 Hz
Impulse Shape:
pos. Rectangle
Running Time:
7min-20min-7min-20min-7min (total 61min)
6. Type of Operation: F
Frequencies:
33333 Hz 44444 Hz 55555 Hz
66666 Hz 77777 Hz 88888 Hz
Impulse Shape:
pos. Rectangle
Running Time:
6 x 10 min (total 60 min.)
Changing the Battery
During operation, the voltage of the battery in the device will be clearly demonstrated by the
segments within the battery symbol. If the voltage falls below a critical level, the
MiniFG
will switch off automatically or it will not allow itself to be switched on again. Then it will be
necessary to replace the battery in the device.
To do this, proceed as follows:
•
Switch the device off.
•
Open the cover of the battery compartment.
•
Remove the exhausted battery from the battery compartment.
