English
61
»
used programme = P – 01
»
Frequency = 100 Hz
»
Pulse Width = 200 µs
»
Therapy duration = 0 min. 44 s
»
Therapy day = 5.
»
Therapy session = 3.
In whole, 90 parameters can be stored, each 3 values for 30 days. By pressing the
left [
▼
] key, the therapy parameters of the last/previous therapy day are shown.
By pressing the left [
▲
] key the therapy data from the next day is shown (until
recent day). By pressing the right [
▼
] key the data of the last therapy session is
shown (until recent session of the day). By pressing the right [
▲
] key the data of
the next therapy session (until the last session of the regarding day).
By pushing and holding the [
E
] key for 5 seconds, the memory is deleted. The LCD
will then show “
CLr
”, and the device will return to Ready mode. The PierenPlus
basic is switched OFF automatically, if not key is pressed for more than 2 minutes.
Further functions of the PierenPlus basic
»
Switch OFF: Press ON/OFF key [ • ] once, if the device is in Ready mode. Press
twice, if a programme is running.
»
Block a programme change: By simultaneously pushing the [
P
] key and the left
[
▼
] key for three seconds, a programme is blocked. The [
P
] key is blocked and no
other programme can be reached.
»
Neutralize the blocking: By – again – simultaneously pushing the [
P
] key and the
left [
▼
] key for three seconds, the other programmes can be reached.
»
Automatic switch OFF – The PierenPlus basic is switched OFF automatically, if no
key is pressed or no stimulation runs for more than 2 minutes.
»
Battery control: The battery symbol appears in the LCD, if the battery voltage falls
below 4.0 V.
»
Electrode detection: The intensity is switched to zero (if higher than 4 mA) if the
electrodes do not have correct contact to the skin (which means, if no load is
detected). The user cannot set the intensity higher than 4 mA, because it returns
