TPP
INSTRUCTION MANUAL
Page 16
Date rev. 28/05/13
Rev. 07
DECLARATION OF CONFORMITY
MODELS :
TPP - TR-6000 / TP-6000 / TS 6000
Pneumatic tool to cut electronic components.
DPP
Pneumatic tool for the depaneling of PCBs.
THE TOOLS
TPP and
DPP
ARE CONFORM TO THE ESSENTIAL REQUIREMENTS OF THE FOLLOWING STANDARD OR HARMONIZING
RULES :
DIRECTIVE 98/31/CE
EN 12100-1
Safety of machinery. Basic concepts, general principles for design.
Part 1 Basic terminology, methodology.
EN 12100-2
Safety of machinery. Basic concepts, general principles for design.
Part 2 Technical principles and specifications.
EN 1050
Safety of machinery. Principles for the risk assessment.
MODELS :
SSF-1 / DPB-1
Pneumatic depaneling machine with 1 pneumatic head.
SDP
Pneumatic depaneling machine form 1 to 3 pneumatic heads.
THE MACHINES
SSF-1, DPB-1 and SDP
ARE CONFORM TO THE ESSENTIAL REQUIREMENTS OF THE FOLLOWING STANDARD OR
HARMONIZING RULES :
DIRECTIVE 98/37/CE
EN 12100-1
Safety of machinery. Basic concepts, general principles for design.
Part 1 Basic terminology, methodology.
EN 12100-2
Safety of machinery. Basic concepts, general principles for design.
Part 2 Technical principles and specifications.
EN 294
Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs.
EN 1050
Safety of machinery. Principles for the risk assessment.
Monteprandone li 06 - 05 - 2008
Legal Represent
CARINI ENRICO
_
Piergiacomi Sud Srl
head office
> Via 81° Strada, 3 – I-63076 Monteprandone (AP)
commercial office
> Via Gramsci, 3 – I-60022 Castelfidardo (AN)
tel. +39-0735-703333 – fax +39-0735-703757 tel. +39-071-78678 – fax +39-071-7822536
http://www.piergiacomi.com
e-mail piergiacomi@piergiacomi.com
