TPP
INSTRUCTION MANUAL
Page 8
Date rev. 28/05/13
Rev. 07
-
TP-6000-15
Cut and Bend Blades for blocking the leads of the component on the PCB, to reach very dense areas.
(Max cut 1.02 mm)
-
TR-6000
Blades TR-6000 are supplied standard with 2 typology of cuts (Fig. 7):
-
CHAMFERED (code TR-6000):
permit also to cut harder components & a number of unlimited cuts
without damaging the blades.
-
FLUSH (code TR-6000-R)
: permit to make flush and precise cuts. Suggested in particular where a
absolute accuracy of cut is needed.
Flush cut Chamfered cut
Fig. 6 – TP-6000-15
FLUSH
CUT
CHAMFERED
CUT
Fig. 7
