TPP
INSTRUCTION MANUAL
Page 9
Date rev. 28/05/13
Rev. 07
TR-6000 blade (chamfered cut, Max cut 1.6 mm, Fig. 5) is available in different versions, as shown on our
catalogues:
- TR-6000 R
(Max cut 1.6 mm) with flush cut.
- TR-6000 PR
(Max cut 1.3 mm) with flush cut, but more pointed tips.
- TR-6000 10/13/15
(Max cut 1.6 mm) with flush cut at different height (1.0mm, 1.3mm &
1.5mm) from the surface.
- TR-6000 C
(Max cut 1.6 mm) with shorter and stronger blades.
-
TR-6000-V
Flush front 60° angled blades, in order to have the access in difficult points.(Max cut 1.3 mm).
Fig. 8 – TR-6000
SUGGESTED
CUTTING
POINT
Fig. 9 – TR-6000-V