3 Intended Purpose
MIRAN DL-P1 is a differential pressure datalogger for measuring and logging of
underpressure in isolated workspaces of asbestos demolition or renovation. The
differential pressure sensor is of flow-through type and therefore very accurate in low
differential pressure and in zero-point. The sensor does not require zero-point
calibration and it is totally independent of operating position.
MIRAN DL-P1 has a built-in alarm led panel which shall blink in case a pre-set alarm
threshold is exceeded. It is also possible to setup beeper alarm, SMS-alarm and email
alarms. Optional external alarm led / beeper (MIRAN ALARM-2) can be connected to
MIRAN DL-P1. The alarm limit can be set to whatever value in measuring instrument
scale (±500 Pa).
MIRAN DL-P1 is designed specifically for the following applications:
Measuring and logging of underpressure in isolated asbestos demolition
workspaces
Measuring and logging of differential pressure in premises
MIRAN DL-P1 should not be used in
Areas at risk of explosion
Diagnostic measurements for medical purposes
11/2017 Pietiko Oy p. 02 251 4402
info@pietiko.fi
5
