- -
12
ALL ABOUT IMAGE RECOGNITION & PROCESSING
(1) CAMERA SELECT
This function is used for setting up camera views. It consists of 16 different optional
camera view combinations.
?
Move the cursor to
Camera Select
field, and press
ENTER
to display the system
information to change the camera view combinations.
?
After the Camera Select field has been set, the cameras that are selected (during
setup) will be displayed (The default setting is “ ----“).
?
There are 16 optional camera view combination settings.
?
Press
MENU
to exit
Camera Select
.
For example:
1) When you choose ( - - - -), all cameras will be disabled.
2) When you choose (1 2 3 4), all cameras will be operational.
3) When you choose ( - - - 4), only camera 4 will be operational.
4) When you choose (1 2 - 4), only cameras 1, 2, and 4 will be operational.
(2) RECORD SELECT
This menu selects the cameras used in the “Each” mode recording setup.
?
Move the cursor to
Record Select
field, and press
ENTER
to change the
combinations of cameras that will be recorded.
?
Press
MENU
to exit the
Record Select
.
(3) RECORD MODE
?
The “ ENTER” key can be used to select between “Quad” and “Each”.
?
When “ Quad” is selected pictures from all cameras will be recorded.
?
When “ Each” is selected, pictures are recorded from the camera(s) selected.
(4) RECORD FRAME RATE
?
When “RECORD FRAME RATE” is selected, you may choose the following
recording speeds for “Quad” mode or “Each” mode.
NTSC:30,15,10,7,5,4,3,2,1fps.
PAL :25,12,8,6,4,3,2,1fps.
