background image

3

www.pifco.co

Wiring safety for UK use only

IMPORTANT

As the colours in the 
mains lead of this 
appliance may not 
correspond with the 
coloured markings 
identifying the terminals 
in your plug, please 
proceed as follows:
The wires in the mains lead are coloured in 
accordance with the following code:

Blue

 neutral [N] 

Brown

 live [L]

Plug Fitting Details (Where Applicable).

 

The wire coloured blue is the neutral and must 
be connected to the terminal marked [N] or 
coloured black.
The wire coloured brown is the live wire and 
must be connected to the terminal marked [L] or 
coloured red.
On no account must either the brown or the blue 
wire be connected to the [EARTH] terminal  .
Always ensure that the cord grip is fastened 
correctly.

The plug must be fitted with a fuse of the same 
rating already fitted and conforming to BS 1362 
and be ASTA approved.
If in doubt consult a qualified electrician who will 
be pleased to do this for you.

Non-Rewireable Mains Plug

 

If your appliance is supplied with a non-
rewireable plug fitted to the mains lead and 
should the fuse need replacing, you must use an 
ASTA approved one (conforming to BS 1362 of 
the same rating).
If in doubt, consult a qualified electrician who will 
be pleased to do this for you.
If you need to remove the plug - disconnect it 
from the mains - and then cut it off the mains 
lead and immediately dispose of its safely. Never 
attempt to reuse the plug or insert it into a 
socket outlet as there is a danger of an electric 
shock.

WARNING:

 

This appliance is double insulated. Do not connect any wire to the earth terminal.

Summary of Contents for BHFP51001













Reviews: