9
www.pifco.co
Oscillation:
This fan is equipped with an oscillation
function, for more even heat distribution
across a room or area.
1.
Push down the oscillation knob at the
back of the motor housing to turn the
oscillation function on. The fan will
automatically begin pivoting from side to
side in a fixed pattern.
2.
Pull the oscillation knob while the fan is
oscillating to turn this function off. The
fan will automatically remain locked at its
current angle, and the wind flow will be
directed that way. To select a different
angle or direction for the wind, turn the
oscillation function back on, as described
above, wait until the fan is facing in
the required direction, then pull the
oscillation knob to stop the oscillation
function and lock the fan into place.
Adjusting the Air Flow:
1.
This unit is equipped with a vertical tilt
function, which can be manually adjusted
to better direct the air flow.
2.
To adjust the vertical tilt angle of the
fan, firmly grip the top half of the motor
housing and push it gently upwards or
downwards as required. The fan will give
off a clicking noise to indicate the tilt
mechanism is working.
3.
Once the fan has been tilted, it will
automatically remain at the selected
angle until manually adjusted again.
NOTE:
The fan’s horizontal angle cannot be
manually adjusted. To change the horizontal
angle of the fan, activate the oscillation
function as detailed above, wait until the fan
is at the desired angle, then pull the oscillation
knob to stop the oscillation function and lock
the fan into place.
Cleaning and care:
•
Before cleaning always switch off the
appliance and remove the plug from the
electrical socket.
•
To clean the outside of the fan, wipe
the exterior with a soft, damp cloth and
white soap. Use a dry cloth to polish it if
desired.
•
Never use any abrasive cleaning materials
to clean the fan.
•
When not in use, store the fan (preferably
in its original box) in a cool, clean and dry
location.
Summary of Contents for BHFP51001
Page 11: ...11 www pifco co Notes ...
