CHAPTER 3. INFINITY RULES
21
footswitch will close Loop 1, and will
simultaneously arm and begin
recording
on Loop 2. Pressing the Loop 1 footswitch next will cause
Loop 2 to close and will simultaneously arm and begin playback on
Loop 1.
3.10
Series & Fade Modes
Trails
In Series mode,
when Trails is selected
, switching between loops at
any time will cue the selected loop to
begin playback automatically
at the end of the current loop cycle.
Similarly,
when Fade is selected
, switching between loops at any time
will
fade the currently playing loop
from the time the button is
pressed until the end of the current loop cycle
and
also cue the newly
selected loop to
begin playback automatically
at the end of the current
loop cycle.
Overdub
When recording an overdub, the overdub will not save until it is closed
and a loop boundary has been passed. As a result, when Full is selected
in Series mode, switching loops right after recording an overdub will
result in the overdub not being present when you switch back to the
other loop. However, Trails and Fade automatically close the recording
at the end of the loop cycle
−
this ensures that the Overdub you just
recorded gets saved. For this reason, it’s best to always use Series
mode with the Trails or Fade setting. You can always accomplish a
Full stop, by double pressing the Stop switch.
