8
Operating Instructions of Derailleur (Shimano Inter-3 Shift Gear)
Your E-Bike is equipped with the Shimano Inter-3 (3-speed shift gear) at the rear wheel
axle. It is easy to change the gear ratio by shifting the gear-change handle while riding.
Handle position
Riding Gradient
Speed / Gear Ratio
3 Level
road
High
2
Level road with a slight slope
Middle
1
At a moderate gradient
Low (To save your energy while
mounting a slope)
If the
gear changes
cannot be performed
smoothly
, please contact your
authorized dealer for adjustment. To
smoothly
shift the derailleur, the steps
below
should be
followed
:
1. Stop pedaling before shifting the gears while riding.
2. Only shift one gear one time while switching the gear-change handle (Revo-shift
lever shown as above).
3. Resume pedaling.
Note:
If you shift the gears
while
pedaling, a clash may be heard due to gears shifting over
dynamic moving parts.
Operating Instructions of Go-Button and Throttle Handle Kit
*(Optional)
The power assist of your E-Bike will remain
on
continuous
ly
when the Go-Button
is
held on
or
the T
hrottle Handle is
twist
ed
.
Note: Do not use Go-Button or Throttle Handle without pedaling especially when
travelling up
a slope.
The use of the Go-Button or Throttle Handle will reduce the battery range during your ride.
Pedaling becomes heavier
(Indicator moves
:
1
→
2
→
3)
Revo-shift lever
Pedaling becomes lighte
r
(Indicator moves
:
3
→
2
→
1)
Indicator
Indicator