T H E M O D E R N M - B U S T E C H N O L O G Y
PiiGAB Process Information i Göteborg AB
17
81
0M
.E
.1
.1
4
MAC address, which is filled out according to the picture. Click “Next” after this. If
the configuration is made via the serial port use adapter 2, see chapter 2.8.1.
Follow the Wizard instructions to co figurate this way. The difference to configure
via the network is that the voltage has to be turned on and off in order for the
settings to have an effect.
Figure 4-4. Change IP settings
– enter new IP settings
Fill out the fields, IP-address, Netmask, and Gateway. If you are using DHCP
choose the upper option otherwise choose the lower. If you are going to use a
unique IP address contact the responsible for the network in order to get the
correct information. Click on “Next” to continue.
Figure 4-5. Change IP settings
– update device