Motorola
®
The decoder utilizes 4 Motorola® addresses to access functions F1 - F 16, when using a Motorola—based
command station. The three sequence addresses for the functions F5 - F16 are ascending to the decoder address
and can be activated in CV61 as required by the values 1 (F5 - F8), 2 (F5 - F12), or 3 (F5 - F16).
Configuration of CVs
CVs 12 and 29 control the operating mode and configuration CVs, respectively. As a rule, an indexed CV contains
various basic settings of a decoder, such as reversing the direction of travel. CV calculation examples can be found
in the detailed operating instructions.
RailCom
®
, RailCom Plus
®
In the sound decoder, CV29 (RailCom®) can be turned on or off via bit 3. The decoder is automatically recognized
by RailCom Plus® - equipped command stations (like PIKO SmartControl) if the RailCom Plus® option is activated
in CV 28. The decoder name, locomotive symbol, and special function symbols will appear automatically on your
control device’s screen. With RailCom Plus® technology, no locomotive data has to be stored in the DCC central
control unit and no locomotive addresses have to be programmed into the decoder.
mfx
®
The PIKO SmartDecoder XP 5.1 Sound also masters the mfx® data format. The decoder is automatically
recognized on mfx®-equipped command stations. The decoder name and its maximum of 16 special function
symbols automatically (license required).
This mfx® technology means that no locomotive data has to be stored in the command station and no locomotive
addresses have to be programmed into the sound decoder.
Braking
The sound decoder understands the following braking methods:
Märklin® braking section (brakes with analog DC voltage)
DCC braking function
ABC (Automatic Brake Control) braking section
The decoder’s adjustable braking distance can bring the train to a stop within a centimeter of a signal. More
information on "braking behavior" can be found in the detailed operating instructions for
PIKO SmartDecoder XP 5.1 Sound.
Shunting speed (RG)
The desired function key F0 - F68, via which the shunting speed (half speed) can be switched on, is entered in
CV157.
Starting and braking delays (ABV)
The desired function key F0 - F68, which can be used to switch off the ABV, is entered in CV156. The values of the
starting and braking delays can be changed in CVs 3 and 4.
Function outputs
A comprehensive description of all options related to the function outputs can be found in the detailed operating instructions.
Simple and extended function mapping
In the simple function mapping according to RCN-225
(CVs 33 - 46)
the switching tasks such as lighting
and special function output can be freely assigned to the function keys F0 to F12 of the digital command station.
The switchable starting and braking delay and the shunting gear can be assigned to any function key up to F68 in
CVs 156 and 157 can be assigned to any function keys up to F68. More information can be found in the detailed
operating instructions.
Smoke generator control
A smoke generator can be connected to output A1, which can be controlled by the decoder either load- or speed-
dependent.
speed-dependent by the decoder. The assignment to the function keys is done exclusively via the extended function
mapping extended function mapping.
Extended function mapping
Due to its complex nature, extended
function mapping
cannot easily be set by programming individual CVs. To
work with extended
function mapping
, you will need the PIKO SmartProgrammer device (#56415) and, if desired,
the PIKO SmartTester (#56416). Detailed information on extended function mapping is available in the instruction
manual.
Servo control
The decoder enables the control of a servo motor via function output A1. The assignment to the function keys is done
exclusively via the extended function mapping.
The use of a servo with the decoder requires electronics expertise.
Further information can be found in the detailed operating instructions.
ATTENTION:
Soldering on the decoder should only be carried out by experienced specialists with the appropriate tools.
Decoders damaged by improper handling will not be covered by the warranty.
Sound settings
To change the overall sound volume of the SmartDecoder XP 5.1 Sound, first program CV31 to a value of 2 and CV32 to
a value of 0.
This will take you to the programming area for setting the total volume. You can now set this as you wish in CV257 in the
value range 0 - 255.
NOTE: In order to play a PIKO sound on the sound decoder, the test and programming device requires PIKO
SmartProgrammer (#56415) and (optional) the PIKO SmartTester (#56416).
All further information about the sound section of the PIKO SmartDecoder XP 5.1 Sound as well as the available
For setting options, please refer to the detailed operating instructions.
Factory reset
To restore the sound decoder to its factory settings, program CV8 to a value of 8.
Programming
Configuration variables (CVs) form the basis of all the decoder’s settings. This decoder can be used with the
PIKO SmartControl
light
DCC system, the PIKO SmartControl DCC system, or any other Motorola-based system.
For more information on programming options, please refer to the instruction manual.
Märklin® and mfx® are registered trademarks of Gebr. Märklin & Cie. GmbH, Göppingen
Motorola
® is a registered trademark of Motorola Inc. Tempe, (Phoenix) Arizona / USA
RailCom® and RailComPlus® are registered trademarks of Lenz Elektronik GmbH, 35398 Gießen
NOTE:
This product is not a toy and is not suitable for children under the age of 14. Any liability for damage of any
kind caused by improper use or failure to observe these instructions is excluded.
Service:
Internet: www.piko.de
E-Mail:info@piko.de
In the event of a defective decoder, please return the decoder module to PIKO along with proof of purchase, the decoder
address, and a short description of the problem.
Warranty Statement
Each decoder module is fully tested before shipment. Nevertheless, should a malfunction occur within the 2-year warranty
period, we will repair the module free of charge on presentation of the proof of purchase. This warranty is voided if the unit
has been damaged by improper use. Please note that, according to the German Electromagnetic Compatibility Law (EMV-
Gesetz), the decoder module may only be used inside models bearing the CE mark.
Product subject to changes. All rights reserved. Printed 10/2021.
Copy and duplication of this text are permissible only with the permission of the publisher.
