3A-7-2
Smartview status and failure indications
Smartview related status and failure indications on the SV Status / Failure field:
SV Indication
Description
SV
Position and altitude used to position the synthetic scenery
meets the integrity requirements. SV is selected ON and
displayed.
SV OFF
Position and altitude used to position the synthetic scenery
meets the integrity requirements, but SV is not selected ON.
SV RATE
SV is selected but not being displayed due to a too low refresh
rate.
SV POS
SV is selected but not being displayed due to position/altitude
failure, or
SV is being displayed but a position integrity error was
detected.
SV FPS
SV is selected but not being displayed due to the Flight Path
Symbol (FPS) being invalid.
SV TER
SV is selected but not being displayed due to a terrain
rendering failure.
SV TRK
SV is selected but not being displayed because APEX has
been switched to track mode (e.g. at high latitudes).
SV REV
SV is selected but not being displayed due to the PFD being
switched to composite mode.
Note
The SV related status and failure indications are for information only. No pilot action is
required.
Section 3A - Abnormal Procedures (EASA Approved)
Smartview status and failure indications
Pilot's Operating Handbook
Report No: 02406
Issue date: Mar 06, 2020
Page 3A-7-2
12-C-A15-48-0307-00A-141U-A
FOR
GENERAL
AND
FAMILIARIZATION
PURPOSES
ONLY
