Rename the Bricks
The physical Brick names indicate the physical location of the Brick in the rack.
The actual names or logical names, as seen in the Pillar Axiom Storage Services
Manager GUI, may be different.
The logical name of each Brick is determined during the installation and follows
the scheme Brick001, Brick002, Brick003, and so on. It is likely that after a new
installation or a Brick upgrade, a new Brick may not have the same physical and
logical name.
Tip: We recommend that in case of a mismatch between the physical and logical
name of the Brick, the logical name must be renamed to match the physical
name of the Brick. Thus, physical Brick 1 must match the logical Brick name
Brick001 that appears in the GUI.
1 Perform a physical inspection of all the Bricks in the Pillar Axiom 600
system to determine the physical location of each Brick within the rack.
2 In the Pillar Axiom Storage Services Manager GUI, click the Health icon in
the top context pane.
Figure 67 Logical Brick names on the GUI
3 Under Hardware in the navigation pane, select Bricks.
4 Select the Brick whose logical name you want to modify. For Example:
Brick001. This opens the Modify Brick Name dialog box.
Chapter 7 Initial Configuration
Rename the Bricks
141
