Engine Uint
Fi
ll A
bl
Note
: The cowl is already pre-build
for right thrust and down thrust The
Firewall Assembly
Note
: The 2 degree
RIGHT
thrust
and 3 degree
DOWN
thrust have
been built, just keep the firewall
same distance from the edge
for right thrust and down thrust. The
center of the engine axle will be in
the exact center of the cowl.
1. Measure the length of the engine
(from the firewall to the prop thrust
washer) , the cowl and the engine
box for the proper distance allowing
1/4”to 1/2” from the edge of the
Note
: There are both right thrust line
and down thrust line marked on the
1/4 to 1/2 from the edge of the
cowl .Then mark the location
and down thrust line marked on the
engine box .
move
32
The excess plywood has been cut away