17/01/2020 / DC1 / Version2
Getting Started
Step 1. Connect Nozzle
Inspect the charger for any visible damage. Do not use the charger if damaged.
Connect nozzle end to the car. Charging starts automatically.
For the Pilot EV Lite Socket model, make sure that the other end of the cable is
connected to the charger.
Step 2. Remove Charger
Do not unplug the charger while charging.
Stop the charging process in the car. Release the latch on car’s charge port
(if applicable).
Unplug the charger from the car.
Close the car’s charging port cover.
Step 3.
Charging Status Screen 11 Power up the device
The charging status is indicated by the different logo led lights
and via the LCD screen (depending on the model).
No Light – Charger is not receiving any power (power-loss)
Flashing Blue Light – Charger initialization process.
Constant Blue Light – Charger is ready for use.
Flashing Green Light – Charging in progress.
Constant Green light - Charging is complete.
Flashing Red light – An error detected. Charging immediately stops.
Connect Nozzle
13
14
+44 (0) 1606 59 66 22
