warranty is limited to construction or production defects in both material and workmanship, and does
not cover any parts damaged due to misuse or modification.
Should you wish to return this airplane for any reason, all shipping costs are the responsibility of
customer.
If any parts are needed to be replaced by the manufacturer, the original parts must be returned, at the
costumers expense.
Do not regard this plane as a toy!
The manufacturer can not supervise the assembly and maintenance of the model or ensure your correct
radio installation. Therefore, the manufacturer can not be made responsible or liable for any damage
occurring during the use of this radio controlled model. As such all responsibility for the correct build,
maintantence and operation must be accepted by the customer. The operation of the model is taken as
acceptance by the customer of their acceptance to the above.
The model is highly prefabricated and ready for use, however please also assure that any pre-installed
(such as pushrodand ball link sets, fuel tank, etc) components are tight, secure and airworthy both for
the first flight and subsequent flights as part of your routine maintenence and verification.
In no event does Pilot-RC accept any liability to exceed the original cost of the basic Pilot-Rc airframe
provided (accesories such as engine or radio system are also excluded from liability).
To ensure safety, please read the instruction manual thoroughly before assembly. Building and
operating model planes requires diligent practice and correct guidance. Any neglect, carelessness or
lack of experience can cause serious bodily harm or damage to property.
Seek the assistant of local model flying clubs and or an experienced aeromodeller for assembly,
operation and maintenance to ensure a quick and successful learning process.
Fly only at designated model flying fields approved by the AMA (Academy of Model Aeronautics), the
MAAC (Model Aeronautic Association of Canada) or the similar corresponding governing body for
your country.
Summary of Contents for Pitts Challenger
