47
If the meter is equipped with analog output ( i.e. PMAC735--AO--), you will be able to look up
the relevant object of analog output and multiple of analog output.
■
Object of analog output
1.
Press the key
until An-ob appears;
2.
Press the key
, and the cursor appears;
3.
Press the key
to select nULL or others;
4.
Press the key
to confirm the selection,
and the cursor disappears.
Note: After re-set the object of analog output,
please re-start the device (PMAC735).
■
Multiple of analog output
1.
Press the key
until An-MU appears;
2.
Press the key
, and the cursor appears;
3.
Press the key
to modify value;
4.
Press the key
to confirm new value,
and the cursor disappears.
Note:
1.
nULL: disable;
U1: Phase A voltage; U2: Phase B voltage; U3: Phase C voltage;
U12: Line AB voltage;
U23: Line BC voltage;
U31: Line CA voltage;
I1: Phase A current ; I2: Phase B current; I3: Phase C current ;
P: Total active power; q: Total reactive power; PF: Total power factor; F: Frequency;
2. In multiple setting, there is one digit of decimal with the displayed data and it is the last digit.
