Overview
Operating Manual PSEN ml s 1.1/2.1/2.2
1004710-EN-05
| 11
3
Overview
3.1
Approved combinations
An approved combination (unit) consists of a safety switch and the corresponding actuator.
For information such as product type, features and order number, see
PSEN ml s 1.1
Safety switch
Actuator
PSEN ml s 1.1 switch
PSEN ml 1.1 actuator
PSEN ml 1.1 round actuator
PSEN ml s 2.X
Safety switch
Actuator
PSEN ml s 2.1 switch
PSEN ml 2.1 actuator
PSEN ml 2.1 round actuator
PSEN ml s 2.2 switch
PSEN ml 2.1 actuator
PSEN ml 2.1 round actuator
3.2
Device features
}
Safe guard locking for swing gates and sliding gates
}
Safe interlocking (position monitoring)
}
Transponder technology
}
2 safety outputs
}
Safety Device Diagnostics (SDD)
– Safety Device Diagnostics can be used to poll sensor information, to perform actions
and to read configuration parameters
– Manipulation protection in accordance with ISO 14119 is possible by verifying the
short name of the actuator through the controller via SDD communication
}
Diagnostic input for Y1 for Safety Device Diagnostics (SDD)
}
Signal output/diagnostic output Y32 for Safety Device Diagnostics
}
Monitoring of shorts between the safety outputs
}
Guard locking element keeps the safety gate from being opened unintentionally
}
Auxiliary release for opening the safety gate
}
1 signal output
}
Suitable for left and right hinged safety gates
}
Pilz coding type
– PSEN ml s 1.1: coded
– PSEN ml s 2.1: fully coded
– PSEN ml s 2.2: uniquely coded
}
M12, 12-pin male connector
