Technical details
Operating Manual PNOZ ml1p
21575-EN-06
23
Environmental data
773540
773545
Shock stress
In accordance with the standard
EN 60068-2-27
EN 60068-2-27
Acceleration
15g
15g
Duration
11 ms
11 ms
Max. operating height above sea
level
2000 m
2000 m
Airgap creepage
In accordance with the standard
EN 61131-2
EN 61131-2
Overvoltage category
III
III
Pollution degree
2
2
Rated insulation voltage
30 V
30 V
Protection type
In accordance with the standard
EN 60529
EN 60529
Mounting area (e.g. control cab-
inet)
IP54
IP54
Housing
IP20
IP20
Terminals
IP20
IP20
Mechanical data
773540
773545
Mounting position
Horizontal on top hat rail
Horizontal on top hat rail
DIN rail
Top hat rail
35 x 7,5 EN 50022
35 x 7,5 EN 50022
Recess width
27 mm
27 mm
Max. cable length between two link
modules
1 km
1 km
Material
Bottom
PPO UL 94 V0
PPO UL 94 V0
Front
ABS UL 94 V0
ABS UL 94 V0
Connection type
Spring-loaded terminal, screw
terminal
Spring-loaded terminal, screw
terminal
Conductor cross section with screw
terminals
1 core flexible
0,25 - 1,50 mm², 24 - 16 AWG
0,25 - 1,50 mm², 24 - 16 AWG
2 core with the same cross sec-
tion, flexible without crimp con-
nectors or with TWIN crimp con-
nectors
0,25 - 0,75 mm², 24 - 20 AWG
0,25 - 0,75 mm², 24 - 20 AWG
Torque setting with screw terminals
0,25 Nm
0,25 Nm
Stripping length with screw termin-
als
7 mm
7 mm
Conductor cross section with
spring-loaded terminals
1 core flexible without crimp
connector
0,25 - 1,50 mm², 24 - 16 AWG
0,25 - 1,50 mm², 24 - 16 AWG
1 core flexible with crimp con-
nector
0,25 - 0,75 mm², 24 - 20 AWG
0,25 - 0,75 mm², 24 - 20 AWG
Spring-loaded terminals: Terminal
points per connection
1
1
