PNOZ X2
Operating Manual PNOZ X2
1003353-EN-08
| 13
Technical details
General
Certifications
CCC, CE, EAC (Eurasian), TÜV, cULus Listed
Electrical data
Supply voltage
Voltage
24 V
Kind
AC/DC
Voltage tolerance
-15 %/+10 %
Output of external power supply (AC)
4,5 VA
Output of external power supply (DC)
2 W
Frequency range AC
50 - 60 Hz
Residual ripple DC
160 %
Duty cycle
100 %
Max. inrush current impulse
Current pulse, A1
1,7 A
Pulse duration, A1
1,5 ms
Inputs
Number
2
Voltage at
Input circuit DC
24 V
Start circuit DC
24 V
Feedback loop DC
24 V
Current at
Input circuit DC
25 mA
Start circuit DC
30 mA
Feedback loop DC
30 mA
Min. input resistance at power-on
468 Ohm
Max. overall cable resistance Rlmax
Single-channel at UB DC
50 Ohm
Single-channel at UB AC
150 Ohm
Dual-channel with detection of shorts across con-
tacts at UB DC
15 Ohm
Dual-channel with detection of shorts across con-
tacts at UB AC
30 Ohm
Relay outputs
Number of output contacts
Safety contacts (N/O), instantaneous
2
Max. short circuit current IK
1 kA
Utilisation category
In accordance with the standard
EN 60947-4-1
