PZE X5
Operating Manual PZE X5
1003301EN05
12
Mechanical data
774595
Conductor cross section with screw terminals
1 core flexible
0,20 4,00 mm², 24 10 AWG
2 core with the same cross section, flexible with
crimp connectors, no plastic sleeve
0,20 2,50 mm², 24 14 AWG
2 core with the same cross section, flexible without
crimp connectors or with TWIN crimp connectors
0,20 2,50 mm², 24 14 AWG
Torque setting with screw terminals
0,50 Nm
Connection type
Screw terminal
Mounting type
Fixed
Dimensions
Height
87,0 mm
Width
45,0 mm
Depth
121,0 mm
Weight
270 g
The standards current on 200912 apply.
Safety characteristic data
Operating
mode
EN ISO
138491:
2008
PL
EN ISO
138491:
2008
Category
EN IEC
62061
SIL CL
EN IEC
62061
PFH
D
[1/h]
IEC 61511
SIL
IEC 61511
PFD
EN ISO
138491:
2008
T
M
[year]
–
PL e
Cat. 4
SIL CL 3
2,31E09
SIL 3
2,03E06
20
All the units used within a safety function must be considered when calculating the safety
characteristic data.
INFORMATION
A safety function's SIL/PL values are
not
identical to the SIL/PL values of
the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.
Supplementary data
CAUTION!
It is essential to consider the relay's service life graphs. The relay outputs'
safetyrelated characteristic data is only valid if the values in the service life
graphs are met.
The PFH value depends on the switching frequency and the load on the relay output. If the
service life graphs are not accessible, the stated PFH value can be used irrespective of the
switching frequency and the load, as the PFH value already considers the relay's B10d
value as well as the failure rates of the other components.
