Operating Manual PMCenergy SD
1004547-EN-01
Extension module (option)
En
gl
is
h
29
Fig. 15: Connect the Dynamic Energy Storage Unit and the extension module (top side of the housing)
⌧
On the extension module, detach the connecting cable from X3 and insert it into
X1 on the extension module.
The Dynamic Energy Storage Unit and the extension module are connected.
7.4
Connecting an additional extension module
Fig. 16: Discharging extension module 2 (top side of the housing)
⌧
On extension module 2, plug the supplied connecting cable
into X2 and X3 and
wait for approximately 30 seconds.
Extension module 2 will be discharged.
