Introduction
Operating Manual PMCprotego S2-2(-C)
1002529-EN-04
5
1
Introduction
1.1
Validity of the documentation
This documentation is valid for the products PMCprotego S2-2 and PMCprotego S2-2-C. It
is valid until new documentation is published.
This operating manual explains the function and operation, describes the installation and
provides guidelines on how to connect the product PMCprotego S2-2(-C).
Please also refer to the following documents from the motion control range:
}
The configuration of the expansion card is described in the online help for the Configur-
ator PASconfig SDrive.
}
The servo amplifier PMCprotego D is described in the "PMCprotego D operating
manual".
}
Details of how to set the parameters for the servo amplifier are described in the help for
the commissioning software PASmotion.
All these manuals can be found on the supplied DVD: "Motion Control"
You will need to be conversant with the information in these documents in order to fully un-
derstand this operating manual.
1.1.1
Retaining the documentation
This documentation is intended for instruction and should be retained for future reference.
1.2
Definition of symbols
Information that is particularly important is identified as follows:
DANGER!
This warning must be heeded! It warns of a hazardous situation that poses
an immediate threat of serious injury and death and indicates preventive
measures that can be taken.
WARNING!
This warning must be heeded! It warns of a hazardous situation that could
lead to serious injury and death and indicates preventive measures that can
be taken.
CAUTION!
This refers to a hazard that can lead to a less serious or minor injury plus
material damage, and also provides information on preventive measures
that can be taken.
