Commissioning
Operating Manual PMCprotego S2-2(-C)
1002529-EN-04
63
Configurator
RS 232
Ethernet
Safety car
d 1
1
Configurator
SD
RS 232
Ethernet
Safety car
d 3
SD
Safety car
d 2
5
5
6
4
Configurator
Safety car
d 1
SD
SD
3
4
2
Fig.: Download configuration
Legend:
1
Downloading a configuration from the Configurator directly to safety card 1
2
Downloading a configuration via an SD card, which is written by the PC
3
Inserting an SD card into the read device of the servo amplifier for safety card 1
4
Downloading a configuration to the safety card from an SD card in the servo amp-
lifier
5
Downloading a configuration via an SD card, which is written by the servo ampli-
fier (safety card 2)
6
Inserting an SD card from the servo amplifier for safety card 2 into the read device
of the servo amplifier for safety card 3
7.3.3.1
Download configuration from Configurator to safety card
1
The configuration data on the safety card can be downloaded directly from the Configur-
ator to the safety card in the servo amplifier.
Prerequisite:
}
Connection is established between the PC and servo amplifier (RS 232 or Ethernet).
Procedure:
}
Select
Online Mode -> Download Project
in the safety card's Configurator.
INFORMATION
Further information is available in the safety card Configurator's online help.
