Overview
Operating Manual PNOZ m EF 8DI2DOT
1004649-EN-03
| 7
2
Overview
2.1
Scope of supply
}
Expansion module PNOZ m EF 8DI2DOT
}
Jumper
2.2
Unit features
Application of the product PNOZ m EF 8DI2DOT:
Expansion module for connection to a base unit from the PNOZmulti 2 system.
The product has the following features:
}
Can be configured in the PNOZmulti Configurator
}
Semiconductor outputs:
– 2 dual-pole safety outputs
Up to PL e of EN ISO 13849-1 and SIL CL 3 of EN IEC 62061, depending on the ap-
plication.
The outputs are suitable for controlling a press safety valve in accordance with EN
692.
– Open circuit detection configurable
}
8 inputs
– The inputs can be used to evaluate run monitoring for press applications.
– Configurable pulse suppression at the inputs
}
LED display for:
– Error messages
– Diagnostics
– Switch state of the outputs
– Switch state of the inputs
}
Monitoring of shorts across contacts at the inputs by test pulses
– from the base unit
– from the expansion module
}
Monitoring of shorts between the safety outputs
}
Plug-in connection terminals:
Either spring-loaded terminal or screw terminal available as an accessory (see Order ref-
erences for accessories).
}
Please refer to the document "PNOZmulti System Expansion" for details of the base units
PNOZmulti 2 that can be connected.
