PSEN ma1.3p-20
Operating Manual PSEN ma1.3p-20
22147-EN-05
| 7
}
Do not remove the connector's protective cap until you are just about to connect the unit.
This will prevent potential contamination.
Unit features
}
The actuator PSEN ma1.3-08 or PSEN ma1.3-12 belongs to the safety switch.
}
Coded actuator
}
Safety switch with 8-pin M8 male connector
}
2 safety contacts (reed contacts - N/O)
}
1 auxiliary contact (N/O)
}
Different operating distances depending on the actuator see
}
Design:
– Safety switch with round design
– Actuator with round design: PSEN ma1.3-08
– Actuator with square design: PSEN ma1.3-12 (various directions of actuation pos-
sible)
}
Operation Magnetic
}
Switching voltage 24 VDC
}
LED to display switch status
Function description
If the actuator is within the response range (safety gate closed), the safety contacts and the
auxiliary contact on the safety switch will be closed and the LED will light.
Operate the PSEN ma1.3p-20 in conjunction with the following components:
}
Actuator PSEN ma1.3-08 or actuator PSEN ma1.3-12 (see
)
and
}
a connected evaluation device (see
Requirements and connection to evaluation
devices [
