5-1
Operating Manual: PSS 3075-3 Series
General requirements
Please note the following:
• The safety system should be installed in an enclosure, e.g. control
cabinet, that conforms to the protection class required for the
environment.
• When installing the system in an enclosure such as a control cabinet, the
environmental data for the safety system must be taken into account.
Details can be found in the chapter entitled “Technical Details”.
• Ensure there is sufficient ventilation to prevent heat building up within the
control cabinet. Please note the ambient temperature of 0 ... 60 °C.
• In extreme ambient conditions, additional measures may be required in
order to keep within the prescribed value range.
• Use low interference panel lighting for inside the control cabinet.
• The safety system must be installed in such a way that there is adequate
protection against buttons and switches being operated unintentionally.
CAUTION!
Risk of burns!
Do not touch the metal parts of the housing.
If the safety system is operated at an ambient temperature of more than
45 °C, surface temperatures on the housing may reach more than 80 °C at
full load.
Installing the safety system
There are two options for installing the safety system. Both options are
shown in the following illustrations. Drill M4 holes in the control cabinet’s
mounting plate, as shown in the illustrations (tolerance: +/-0.3 mm/0.012").
Attach the safety system to the mounting plate in your control cabinet,
using washers.
Installation
Summary of Contents for PSS 3075-3 Series
