Installing the modules
Installation Manual PSSuniversal
21262-EN-07
36
}
Pull the compact module to the right [2] until the locking element on the relevant com-
pact module is completely free.
}
On the mounting rail, slide the compact module to the right.
}
Pivot the compact module forwards [3] and remove in a downward direction [4].
[3]
[4]
[1]
[2]
5.5
End bracket
5.5.1
Install an end bracket on the left
Procedure:
}
Use a screwdriver for slotted-head screws (M2).
}
Loosen the fixing screw on the end bracket until the terminals are far enough apart for
the end bracket to be positioned on the mounting rail.
}
Place the end bracket on the mounting rail, to the left of the head module [1].
}
Slide the end bracket up close to the head module [2]
}
Tighten up the end bracket [3].
