Installing the modules
Installation Manual PSSuniversal
21262-EN-07
38
Procedure:
}
Loosen the fixing screw on the metallic end bracket
}
Place the metallic end bracket on the mounting rail
}
Slide the metallic end bracket up close to the terminating plate with the integrated end
bracket
}
Tighten up the metallic end bracket
[5]
[3]
[6]
[1]
[2]
[4]
5.5.3
Remove the end bracket on the left
Procedure:
}
Use a screwdriver for slotted-head screws (M2).
}
Loosen the fixing screw on the end bracket until the terminals' clamping force is lifted.
}
Remove the end bracket from the mounting rail.
