Installing the modules
Installation Manual PSSuniversal
21262-EN-07
39
5.5.4
Remove the connection plate on the right
Procedure:
}
Use a screwdriver for slotted-head screws (M2).
}
Insert the screwdriver into the terminating plate [1]
}
Loosen the fixing screw on the end bracket [2].
}
Move the terminating plate and integrated end bracket to the right [3].
Please note: Do not damage the elements used to connect to the adjacent base mod-
ule.
}
Loosen the fixing screw on the end bracket until the terminals' clamping force is lifted.
}
Remove the terminating plate and integrated end bracket from the mounting rail.
[3]
[2]
[1]
[3]
