Connecting the PSSu system
Installation Manual PSSuniversal
21262-EN-07
48
Supply group 1
Supply group 2
Supply group 3
Periphery Supply 1
(24 V DC)
C-rail supply
C-rail supply
C-rail supply
Periphery Supply 2
(24 V DC)
Periphery Supply 3
(24 V DC)
The supply voltage for the first supply group can also be integrated within the head module.
6.5
Wiring the base modules
Procedure:
}
Use a flat blade screwdriver (DIN 5264-A)!
DIN 5264-A
}
Strip the wire back 8 mm.
}
If necessary, label the connection level with a colour marker [3].
}
Base module with screw terminals:
– Use a screwdriver to loosen the screw on the screw terminal [1]
– Insert the stripped cable into the round fixing hole [2], as far as it will go.
