HUNTER-PRO 32 User Manual LED Keypads
8
Programming time and date
-
Numerical LED 8
constantly ON
RXN-9/416
(After pressing NEXT)
Programming the user codes
-
Numerical LED 9
constantly ON
RXN-9/416
Programming zones for
Chime feature
Enabling/Disa
bling the
Chime
feature
Numerical LED 7
constantly ON
RXN-9/416
Programming automatic
arming hour and silent time
for automatic arming
And valid
User Code
brings User
Menu
Numerical LED 4
constantly ON
RXN-9/416
O
PERATION
NOTE:
Regular key press
Long key press, until confirmation beep is heard
System Access Codes
The system can be operated using each of the following codes:
Master Code,
User Code, and Short Code
. The Short Code is only useful for arming the
system.
There are two additional unique codes,
Duress Code
and
Relay Code
. The
Duress Code will disarm the system and at the same time will send a duress
event to the monitoring station. The Relay Code will activate the on board
relay according to programming.
By default, entering a User Code will toggle the partition/system state (i.e., if it
was disarmed it will commence arming and if it was armed it will disarm).
NOTES:
The system’s default Master Code is:
5555
The User Menu can also be accessed as follows:
User Code or Installer Code
