HUNTER-PRO 896 Installation Guide
11
15
TRANSMITTER – Connection to Long-Range Radio/GSM-200 Cellular
Transmitter/SMS-100
TRANSMITTER is a connector to PIMA long-range radio transmitters TRU/TRV-100, to
the cellular transmitter GSM-200 (see section. 3.13) and to the SMS-100 - PSTN
SMS card.
NOTES
:
GSM-200 and SMS-100 cannot be installed simultaneously.
To connect long-range transmitters other than PIMA’s use TX-1000 adaptor.
16
KEYPAD – Keypad Connector
Connector to installer/technician keypad (using the TC-3 cable).
17
Expansion Cards Connector
Connector to OUT-1000 and EXP-PRO expansion cards (refer to sections
3.3.1 and
3.9).
18
SERIAL Connector
The SERIAL connector is used for connecting to TCP/IP communication and
GSM-200 transmitter.
19
JP5, JP10 – Siren Type
Jumpers
Set the sirens type (in conjunction with JP6). See the table below.
20
JP6– Siren Power Source
Set the power source of the sirens. See section
3.6 for connecting various types of
sirens and bells.
Jumpers state table:
Jumper
State
Siren Type
J5 J10 J6 Power
AC
(unregulated) current
(Speaker)
Up to 200mA
DC
low current (Piazzo)
Up to 200mA
DC
high current (Bell)
Up to 1A
