42
HUNTER-PRO 896 Installation Guide
5 P
ROGRAMMING
5.1
Enabling Enhanced Communication Menu
HUNTER-PRO 896 has an enhanced menu with various communication parameters. By
default, this menu is not enabled. This is because most installations do not require
programming these parameters. If you do not have the knowledge required please do
not change the default parameters.
To enable access to the enhanced menu, either mark “+” under parameter ‘P’ in the
first “General Parameters” screen (see section
5.6.1) or press long
in the first
Communication menu (key #3).
5.2
Key #1
: System Installation
Note
: From here onwards, though not appeared in drawings, Technician code (default
1234) must first be entered for accessing all technician menus.
Sys Installation
ENTER/NEXT/END
ENTR
1
System Installation menu contains parameters such as service provider, expanders,
wireless setup and keypads.
5.2.1
Service Provider and End of Service Date
ENTR
1
Service Provider
ENTER/NEXT/END
9
Sys Installation
ENTER/NEXT/END
ENTR
Service Provider
PIMA El. Systems
Enter the system’s service provider’s details, like name and telephone number. To
display this screen, press long
, when the system is disarmed.
Press
and set the date in which the service ends. In that date the following 2
messages appears onscreen
1
intermittently:
14 MAR 08 12:00
Call Service
14 MAR 08 12:00
Service Provider
...
.
The messages ceases to appear in next arming or when entering technician code.
5.2.2 Expanders
ENTR
1
Expanders
ENTER/NEXT/END
ENTR
NEXT
Sys Installation
ENTER/NEXT/END
Set the details for the expanders installed in the system.
1
This message appears only if the default service provider has been changed and the
end of service date is set.
