44
HUNTER-PRO 896 Installation Guide
5.2.3.1
Deleting a Wireless Zone
ENTR
1
Wireless Setup
ENTER/NEXT/END
ENTR
NEXT
Sys Installation
ENTER/NEXT/END
X2
9
Add Zone?
ENTER/NEXT/END
NEXT
Delete Zone?
ENTER/NEXT/END
and enter zone number
Device Deleted
Press END
Delete Zone?
Please Wait...
….
5.2.3.2 Supervision
Interval
ENTR
1
Wireless Setup
ENTER/NEXT/END
ENTR
NEXT
Sys Installation
ENTER/NEXT/END
X2
9
Add Zone?
ENTER/NEXT/END
BACK
Supervision:
ENTER/NEXT/END
ENTR
Supervision:
Hrs:0 Min.s:0
Set the wireless zones’ interval supervision.
5.2.4 Keypads
ENTR
1
Keypads Setup
ENTER/NEXT/END
ENTR
NEXT
X3
Keypads Setup
0
Sys Installation
ENTER/NEXT/END
ENTR
Enter the number of
installed keypads
Part. For RKD
++++++++++++++++
9
Set the number of keypads connected to the system (8 max.). Giving a different ID to
each will indicate the system to supervise them, i.e. monitor their tampers. The IDs
should be given consecutively from #1 to #8.
Note
: If monitoring the keypads is not required, the number of keypads should be set
to “0” (Zero)
5.2.5 Keypads’
Partitions
Set which partitions will be controlled by which keypad. Enter a keypad number or
scroll with
and
and mark “+”
to allocate a partition.
to save and go
on to next keypad.
For example: if keypad #2 should only control partition
#2, a “+” is to be marked above #2.
Part. for RKD 2
-+--------------
1 2 3 4 5 6 7 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Note
: Keypad partitions are available only in partitioned system.
