Step 4
Now the two half arches (A) are brought together
in the middle (D) and screwed together. To do this,
place the two bent stainless steel tubes on the
screwed-on foot sections (B).
Step 5
Now push the two half arches (A) together so that
the two plates with the 2 drill holes fit exactly to-
gether. Insert the two 13 mm screws (D) through
the holes in the two plates and screw on the nuts
(D). Now tighten both half arches very tightly with
the 13 mm spanner (F).
Ready, you can now clamp the hammocks into the
LUNO stand.
A2
B2
B1
A1
A1
D
A2
D
Stainless steel care
Recommended:
Stainless steel is the modern material of our time,
hard-wearing, robust and easy to clean. Clean
stainless steel pipes only with a non-abrasive clea-
ning agent. Often a strong rubbing with a soft,
clean cloth is sufficient. Water with dishwashing
detergent removes almost any dirt. For intensive
care we recommend „Stainless Steel Polish“ from
Starbrite.
Unsuitable:
Do not use abrasive substances as they will scratch
the surface. Chrome, silver and brass care products
are not suitable, as they dissolve oxides. Furniture
polishes and other „shiners“ are also unsuitable as
they form a wax film. Metal sponges or iron wool
(often black metal) are not suitable, as they scratch
the surface and leave rusting iron particles.
Use and Safety Instructions
Read the manual before use and keep it for further
questions. For safety reasons, set up the stand with
2 adults. The stand must be set up at ground le-
vel, on a solid floor that does not give way. Regu-
larly check the technical parts. Weight load LUNO
150kg.
The hammock stand is not a rocking stand. Strong
rocking is transferred to the stand attachments
and can cause damage. These are excluded from
the warranty because of incorrect use. Children
should only use the hammock in the presence of
adults and should not be left unattended.
